2004-Up Club Car Precedent - Control Arm Bushing Kit
Review:
MY CART (0)
Cart Subtotal:
Bushings are something every golf cart owner will become very familiar with due to their inherent nature. Even if you don't do your own service, these little rubber beauties will be a frequent topic of conversation. The more you drive your cart, the more you are going to have to replace them. Liners like these are what is commonly referred to as normal wear and tear item. Having a Club Car Precedent Control Arm Bushing Kit on the shelf and ready for an annual tune-up is what separates the pros from the Joes'.
The a-arm suspension on your Club Car is a front-end component. So if your cart seems like it leans into turns, it would be an excellent time to throw one of these packages at it. Also, this set of golf cart bushings and spacers significantly reduces the metal-on-metal contact and noise. As we all know, that is not a quiet thing to experience. Keep your inserts like new and your clanking to a minimum. Buggies Unlimited has the aftermarket accesories you need, whenever those nuisance parts start turning heads.
Hi Keith, yes this may help your issue. Call our technicians for more info on your steering problems.
My 2005 Club Car model is a Precedent...if your’s is a Precedent it should fit
The replacement are polyurethane. tip, remove headlight assy, unbolt the steering rack and tie rod ends and tie up the gear out of the way.
You need to order special bushing for the XRT 1550 4X4. The Precedent and DS bushings are not interchangeable with the 1550 4x4s. The XRT 800s are the same as the DS bushings but not the 1550
Club Car serial # is located on a sticker in the dash storage compartment on the passenger side.
Hi Jeff, feel free to contact us by email via this link: https://www.buggiesunlimited.com/ContactUs. Or give us a call and our tech department can help in making sure bushing kit will work with your cart.
I am not quite sure what bushings to which you are referring but I will answer the best I can. The bushings placed in the control arm for control of movement are a hard polyester type material, not cheap plastic. The end bushings are rubber. All of them are easy to install once you disassemble the front suspension system. They have held up good so far without any issues.
Hello, the 2012 XRT 850 shares the same front end suspension as the DS model. I would recommend covering the entire front end while you're working on it, or at least based on the value of the package, recommend the full front end repair kit, item 6915 (link attached).
these bushings well work on onward cart.
