MY CART (0)
Cart Subtotal:
We do not have to tell you about your vehicle's performance potential. If you have made it to this page, you already have a Navitas controller in your caddie. You know what it means to have excellent takeoff and a higher top speed. However, once you have the tase for speed and torque, you can never get enough. Up until this point, you had to pick a performance mark to build towards. Either you had all the low-end torque you need to pull heavy loads and climb big hills, or you had the breakneck high speeds. Now with the On-The-Fly Programmer for Navitas Controllers, you can get the best of both worlds. All you have to do is turn a knob, and the performance changes as you go.
This golf cart programmer can have its program locked in with a key that comes along with the package. Have a new driver in the family that you're worried about? Limit their speed output and know they are safe no matter what. Call Buggies Unlimited today.
With out the OTF, we have found that the controller is more geared for torque than it is speed and it has a significant REGEN.
No
With a Navitas controller.
You must have a Navitas controller. The on the fly programmer only plugs into the Navitas
You have to replace your controller with the Navitas
Yes it should
Allen this is not cart specific, however for your cart to use this it would need to have one of our navitas controller kits
The on the fly unit only works with a Navitas controller. It will not plug into any other controller.
If you install a Navitas controller with the interface for the Yamaha golf cart you can program the
cart on your cellphone. The ( on the fly ) unit allows you to change max speed, automatic braking,
and acceleration speed without your cell phone. It also allow you to set speed and lock that max speed with a key switch.
only if you have a Navitas Controller installed. I don't think Navitas makes a Controller for your cart? so the short answer is No
The on the fly programmer only plugs directly into a Navitas controller. It will not plug into any other controller.
I have a 48V TXT with the Navitas 600. When I first installed the controller I noticed decent gains in speed and torque. When I plugged in the On the Fly programmer, it made significantly more power when adjusted to the max setting. My cart now runs 24 mph with the stock motor.