1982-03 Club Car DS - GTW 6 Inch Double A-Arm Lift Kit
Review:
MY CART (0)
Cart Subtotal:
We would be willing to bet this is not your first rodeo. If it is, great, but this lift kit is what someone turns to when they discover the cheap one they bought isn't up to mustard. Ride quality and handling the terrain is a big thing when it comes to off-roading; let Buggies Unlimited show you the way with the Club Car DS GTW 6″ Double A-Arm Lift Kit. Our kit takes the average spindle or block lift kit and blows it out of the water like a torpedo.
The key to making sure this kit works for your golf cart is your front hubs. We are talking about the small round cap that protrudes thru the center of your front wheels. If that cap is metal, this lift kit will work fantastically. Are you ready to increase suspension travel while providing a smooth off-road experience? Well, look no further than Buggies Unlimited and get one ordered today.
if you are concerned about lift being too high I suggest you look at a 4" lift kit, I have the larger tires and wheels on mine and it is pretty high, but I do go off road at times..My son used a 4" on his and it is just like mine but not so high..this lift kit is great as far as handling goes..Hope this helps.
Should not be a problem. I used 3+4 on mine and there's plenty of room for another inch or so
With a 20 you may not need the spacer but if you get off-road tires be careful making sharp turns
I think so
No everything is in the kit. Easy to install. Good luck
Jamison yes if you cart does not have front brakes then this will be a perfect fit for you cart
I have 12” rims and could go bigger as there is a lot of clearance still. I don’t know exactly how much bigger though.
Good question, it is not necessary. However, you will notice a proportional speed increase relative to the tire size increase (e.g., 18" to 23" tires = 22% = 22% increase in speed). System component upgrades are relative to your application. If you are using the cart on flat ground with a 4 seat configuration, you will be just fine. Any excessive runtime and loads (weight/hills) will require slight performance modifications. Again, this all relative to your specific needs. You can always learn more at buggiesgonewild
Jake, I need to get new u-bolts that come with the lift kit. The ones provided stripped out. How do I get these?
thx
If it has front brakes, and you want to keep them, answer is no. Jakes spindle lift is all that will work. The front brake components can be removed (cables as well) and it will fit. You have metal dust caps on the spindles, so make sure you get the kit for pre 2004.
Hope this helps.
